L-shaped Single Tube Metal Electric Immersion Heater
We offer a variety of materials to match your application (titanium, stainless steel 304 or 316, and plain steel) in sizes up to 36KW. Standard and custom configurations for over-the-side and bottom installations in open tanks. Thermal overtemperature protection standard (except screw plug), and our certifications include CE.
Referential Specification List
|
WATTS(W)
|
VOLTS(V)
|
TUBE DIA(MM)
|
HORIZ. LENGTH (MM)
|
VERT. LENGTH (MM)
|
| 1000 |
220/380 |
50 |
250 |
460 |
| 2000 |
220/380 |
50 |
350 |
460 |
| 3000 |
220/380 |
50 |
450 |
650 |
| 4000 |
220/380 |
50 |
600 |
700 |
| 5000 |
220/380 |
50 |
750 |
850 |
| 6000 |
220/380 |
50 |
900 |
900 |
| 7000 |
380 |
50 |
1050 |
900 |
| 8000 |
380 |
50 |
1200 |
900 |
| 9000 |
380 |
50 |
1350 |
1000 |
**Three phase standard, single phase available.
Product Descriptions:
1. The heaters are made of SUS304, SUS316 or titanium tubes with the shapes classified into vertical shape, "L "shape, "Z" shape, etc.
2. Power of the heater is designed according to installation location, liquid chemical properties and deposition of the solid-like contents in liquid.
3. Heaters of different power with different hot zone length and the cold zone length is flexible basing on customers' equipment requests. For safety design principle, hot zone of the heaters should be at least 100mm below the liquid level of the chemical plating tank.
4. Heaters power range from 500W to 36000W, voltages from 110V to 480V, both single phase and three phases are available.
5. All heaters are matched with overheat protection switch or PT100 heat detector.
6. All heaters are CE certificated with international quality standard, which insure the service life.
